HS codes for roofing and light-steel screws

Roofing, light-steel and drywall screws fall under HS 7318.14.10. Bolts and sleeve anchors fall under HS 7318.15.10. Here is how to tell them apart.

HS codes for roofing and light-steel screws

The question we hear most: which HS code does this screw fall under? The answer decides which import quota applies. For iron or steel screws and bolts with a shank up to 16 mm, there are only two options.

HS codes for screws and bolts

GoodsHS codeReason
Roofing screws (self-drilling, hex head, EPDM washer)7318.14.10Self-tapping: forms its own thread
Light-steel framing screws7318.14.10Self-tapping
Drywall screws7318.14.10Self-tapping
Sleeve anchors (dynabolt)7318.15.10A bolt with a nut, not self-tapping
Hex bolts, with or without nuts7318.15.10Takes a nut or an existing thread
Machine screws7318.15.10Goes into an existing thread

For shank external diameters up to 16 mm.

Telling 7318.14 from 7318.15

Look at how the screw works. A screw that forms its own thread in the material it enters is self-tapping and falls under 7318.14. Roofing and light-steel screws have a drill point, so they drill and thread in one go. Bolts and screws that need a nut or a threaded hole fall under 7318.15.

Reading the code 7318.14.10

7318.14.10
  1. 73Chapter: articles of iron or steel
  2. 18Heading 73.18: screws, bolts, nuts, washers and similar
  3. 14Subheading 7318.14: self-tapping screws
  4. 10Tariff line: shank external diameter ≤ 16 mm

Import quota for both codes

Both HS codes require an import approval and a surveyor report; the rules are listed on INSW. PT Nusa Delapan Samudera sells screw import quota for 7318.14.10 and 7318.15.10 through undername.

Frequently asked questions

What is the HS code for roofing screws?

HS 7318.14.10: self-tapping screws with a shank diameter up to 16 mm.

What is the HS code for sleeve anchors?

HS 7318.15.10: other screws and bolts, with or without nuts or washers, shank diameter up to 16 mm.

Can I use the HS code from my Chinese factory?

The first six digits are usually the same, but the last two are Indonesia’s own tariff lines. Match them against the table above before documents are issued.

For quota volume and the undername fee per tonne, ask us on WhatsApp. Commodity reference: INSW.